Some Information About Folding Security Doors

December 10,2021

With the increasing number of application places, temporary safety inspection is one of the important means to prevent and reduce violent crimes in public places. Do you know what safety inspection equipment is required for a temporary safety inspection?

 

In addition to the most commonly used hand-held metal detectors and hand-held security rods, folding security doors are necessary for temporary security inspection.

 

folding security doors

 

Installation method of folding security gate

 

👉Set up the entire security gate, connect the power supply, and turn on the switch in the host. At this time, the indicator light is on, and the following debugging work can be started.   

 

👉The correct assembly is the first step to ensure that the security gate is debugged afterwards. If it is not assembled in place, it may not be able to use or detect metal objects. First connect the top host to the door frame, and screw on the screws to fix it.   

 

👉Connect the signal wires and power wires of the door frames on both sides to the corresponding sockets of the host. Do not install them in the opposite direction, so as not to affect the subsequent detection judgment.  

 

👉At this time, you can use some metal objects such as keys, mobile phones, etc. to pass through the security gate for testing. If an alarm sounds, it indicates that the security gate is ready for use.   

 

👉Use the remote control to press the zone button against the panel of the host, and the corresponding indicator light will flash, indicating that the host has received the signal normally and entered the working state.

 

Characteristics of folding security door

 

The folding security door is integrally formed by ABS injection molding, with portable design, foldable, convenient disassembly and transportation, intuitive power display, and power shortage prompt. Multiple security inspection doors can be a networked, modular design, parts can be pulled and inserted, convenient installation and easy troubleshooting.

 

Display panel: high brightness LCD displays the number of people passing and alarm.

 

Alarm setting: sound and light alarm at the same time, 1-99s alarm time, 0-99 continuous volume adjustable.

 

Sensitivity: 6-zone sensitivity and overall sensitivity are adjustable at 4085 levels.

 

Precise positioning: multiple independent detection areas are divided. When the target is detected, the sound and light will alarm at the same time. The column lamp on the measuring side of the door panel will directly display the alarm area, which can accurately locate and visually display the position of the target.

 

Counting function: intelligent passenger flow and alarm technology function.

 

Product technology: ABS injection molding is adopted, which can be effectively waterproof.

 

Control linkage function: when the equipment gives an alarm, the detection door can output one circuit of switching value signal to linkage control the operation of gate wing, etc.

 

Advantages of folding security door

 

✅Its structural design is easy to carry. At present, it is the only security door with a small volume that can be placed in the trunk of an ordinary car, which can be easily transported and installed in any place;

 

✅The design is easy to operate, and one person can install and put it into use in 5 minutes;

 

✅It is the best choice for public places such as the department of public security, the armed police, the army, large-scale activities, sports events, customs stations, school hotels, golf courses, high-end villas and so on.

 

If you are looking for a folding security gate door system for business, we hope to be your choice!

SHARE US: